Common Grades*:
| STAINLESS STEEL | NICKEL ALLOYS | |
- 302 |
- Alloy 20 |
|
- 302HQ |
- 330 |
|
- 303 |
- 330Cb (35-19Cb) |
|
- 304/304L |
- A286 |
|
- 305 |
- C276 |
|
- 310/310S |
- 200/201 |
|
- 314 |
- 400 |
|
- 316/316L |
- K500 |
|
- 321 |
- 600 |
|
- 347 |
- 601 |
|
- 410 |
- 625 |
|
- 416 |
- 718 |
|
- 420 |
- X-750 |
|
- 430 |
- 800 |
|
- 825 |
||
| *Other grades available upon request | ||
- Cold drawn coil to coil in diameters from .045" to .875" |
|||
| Diameter Tolerances | |||
| .045" to .3124" = +/- .001" | |||
| .3125" to .499" = +/- .0015" | |||
| .500" to .750" = +/- .002" | |||
| - Cold drawn coil to bar in lengths from 3' to 40' | |||||
| Diameter Limits | Length Tolerances |
||||
Maximum 20' Length |
Over 20' Length |
||||
| .090" to .3124" | +/- 1/8" |
+/- 1/4" |
|||
| .3125" to .499" | +/- 1/4" |
+/- 1/2" |
|||
| .500" to .800" | +/- 1/2" |
+/- 3/4" |
|||
| - Annealed wire in coil in diameters from .045" to .280" | |
| Diameter Tolerance | |
| .045" to .280" = +/- .001" | |
| - Special diameter and tolerances available upon request | |||||
| Fractional oversized, millimeters, & thread roll pitch | |||||
| - Drawn Shapes: Hexes, Squares, Flats, Half Rounds, and D-shapes |
| - Coil and bar supplied in Condition A or strained hardened (Condition B) | |||||
| - Various surface finishes available on bar & wire | |||||
| Matte, Grease Drawn - Bright, Electro-polish quality | |||||
| - MEDART straightening line for cut lengths in diameters 3/16" to 3/4" |
| - Large inventory of most commonly used wire rod sizes facilitate short lead-times for new orders |
| - Storage of product for "JIT" programs |
| - Conversion of 300 series, 400 series, precipitation hardenable grades, and nickel alloys |